The air gap of the pin inductor is separated by epoxy laminated glass cloth board and bonded with high temperature and high strength connecting glue to ensure the stability of the air gap of the reactor during operation. The iron core is made of high quality and low loss cold rolling The silicon steel sheet is punched and sheared by a high-speed punch. It has small burrs, regular and even shapes, neat and beautiful laminations, and low operating temperature to reduce noise. The coil is made of high-quality insulated wires and wound by a special machine, which has the advantages of good flatness and beautiful appearance.
Reactors can be divided according to their uses: current-limiting reactors, filter reactors, smoothing reactors, pin inductors, power factor compensation reactors, series reactors, balancing reactors, grounding reactors, arc suppression coils, Incoming line reactor, outgoing line reactor, saturable reactor, self-saturating reactor, yoke reactor, series resonant reactor, parallel resonant reactor, etc.
Winding material: copper Specification model: UI3320 Strong electric inductance: 40mH Rated current: AC 1.5A Reactance voltage drop:AC 18.8V\/50Hz Insulation level: CLASS B Altitude: less than or equal to 1000 Winding material: copper | Specification model: EI3514 Strong electric inductance: 5.0mH Rated current: AC 2.5A Reactance voltage drop: AC 4.0V\/50Hz Insulation level: CLASS B Altitude: less than or equal to 1000 | ||
Specification model: UC4717 Strong electric inductance: 10mH Rated current: AC 2.9A Reactance voltage drop: AC 9.4V\/50Hz Insulation level: CLASS B Altitude: less than or equal to 1000 Winding material: copper |
Previous: Small power transformer